Author Topic: Mapping controllers  (Read 2713 times)

Offline nVEMu

  • bit
  • Posts: 1
    • View Profile
Mapping controllers
« on: December 17, 2017, 12:22:59 AM »
Hey guys, new to emulation. Wanted to use the Mayflash 64 adapter with the nVidia Shield TV. It shows that the adapter and controller are recognized, but I cant map them, nor can I figure out how to get to mapping them.

Any help would be appreciated.
« Last Edit: December 18, 2017, 06:26:09 AM by fzurita »

Offline fzurita

  • Moderator
  • double
  • *****
  • Posts: 546
    • View Profile
Re: MuPen64 FZ On Nvidia Shield TV
« Reply #1 on: December 18, 2017, 06:24:38 AM »
To map a controller not listed:
  • Open up the side bar, go to profiles then controller.
  • In there use the top right button to create a new mapping.
  • Give it a name and hit ok.
  • Map your buttons in that screen
  • Go back to the main screen and open the sidebar again.
  • Go to Profiles then Select Profiles
  • Select the profile you created for "controller 1 profile"
« Last Edit: February 09, 2018, 12:03:32 AM by fzurita »

Offline LetsPlay

  • bit
  • Posts: 3
    • View Profile
Re: Mapping controllers
« Reply #2 on: December 29, 2017, 02:33:19 PM »
Hello,
I have tried my Nividia Shield TV Pro for the first time today.
I tried the suggestion by fzurita but I dont understand the "Map your buttons in that screen" (4) part
Can somebody please explain in "baby steps" ?
Also is it possible to  invert some of the controls?

regards a 100% noob

Offline fzurita

  • Moderator
  • double
  • *****
  • Posts: 546
    • View Profile
Re: Mapping controllers
« Reply #3 on: January 01, 2018, 10:04:18 PM »
For step #4, it means to select each N64 button listed by pushing the Shield Controller "A" button. You will be prompted to enter a Shield Controller button to act as that N64 button.

If you map the wrong button, you can clear the current mapping by holding down the A button.

You can invert axis by select the opposite shield controller axis when asked to map a N64 axis.

Offline LetsPlay

  • bit
  • Posts: 3
    • View Profile
Re: Mapping controllers
« Reply #4 on: January 02, 2018, 12:06:36 PM »
thank you so much fzurita  :)
will try this again soon

Offline LetsPlay

  • bit
  • Posts: 3
    • View Profile
Re: Mapping controllers
« Reply #5 on: January 09, 2018, 08:53:01 AM »
I got a little further but this is too complicated for me as im 100% new to this sort of things.
Im also thinking of returning the nividia shield tv to the shop as its just stays in the rack...unused.